JK-16U Temperature Recording Software

JK-16U multi-channel temperature tester equipped with large screen LCD display, U disk to save the interface, can easily measure the display and preservation of temperature data, is a multi-point real-time monitoring and tracking of the instrument. The high voltage semiconductor relay is used to scan the input signal to realize the high speed scanning, which eliminates the noise and the service life of the relay.

Features
1 Large screen liquid crystal display (the temperature values are displayed and a temperature alarm display) combined with the perfect setting and measurement parameters, meet all user measurement display requirements, function more perfect;
2 Front panel can be directly connected with the U disk, the temperature data according to a certain number of intervals stored in the U disk, selection of computer system software to read the temperature data stored in the U disk, draw the temperature curve, the temperature curve of data to the computer;
3 U inventory number interval can be set (when seconds);
4 The measured object is charged state, can be charged test (300V isolation voltage AC), safe and reliable.
5 The channel between scanning speed can be set (1ms ~ 99m);
6 Can be arbitrarily set a temperature alarm channel (standard), also can be in all the channels alarm.
7 Units of temperature Celsius (c) f (F) can automatically switch;
8 The same instrument can be used T, J, K thermocouple meet different temperature range of the test;
9 The test channel can be set arbitrarily, satisfy the measurement and speed requirements;
10 The machine with the date and time off work, still;
11 The status bar display real-time parameters, and can restore factory setting function in the settings;
12 The channel is not uniformity: 0.5 degrees, 0.1 degrees for the instrument resolution, measurement accuracy of better than 0.5;
13 The thermocouple wire with automatic detection function;
14 Equipped with a communication interface (RS232 or RS485); through the communication interface can also select multi temperature test software;
15 Measurement accuracy of better than 0.5;J: 0 ~ 760 ℃K: 0 ~ 1370 ℃T: -100 ~ 400 ℃

Technical characteristics

Can set the upper and lower limits of the temperature value of each channel, beyond the sound alarm. Large screen liquid crystal display, can also display the multi-channel temperature value with U disk interface, insert the U disk can be massive preservation of temperature recording data.

Especially for the lamps, household appliances, electric motors, electric appliances, temperature controller, transformer, thermal protector, and other manufacturers of the industry and the quality inspection department of multi-point temperature field detection. Live real-time monitoring of energy-saving lamp ballast, internal triode, choke coil, magnetic ring, capacitors and other components of the temperature at the same time, the computer will the temperature changes the whole process to curve recorded for reliability analysis and improvement, to improve energy-saving lamps, electronic ballast device plays a large role.

Specifications
1 The temperature range of -100 ℃~ 1000 ℃;
2 The measurement accuracy: 0 ~ 1000 ℃ ± (read: numerical * 0.5%+1) c,
-100 ~ 0 ℃ ± (read: numerical * 0.5%+2) ℃; in the use of "T" type of thermocouple accuracy can reach as high as 0.1%
3 Has the function of anti high frequency interference.
4 The temperature signal input channel number: the most configurable 8 groups, each of 8 road;
5 Sensor: nickel chromium nickel silicon thermocouple (K) (T type, J type can be made).
6. Environmental conditions allowed:
1) power supply: AC 220V + 10%, 50Hz + 2%;
2)Relative humidity: 20%－90%;
3) Working temperature: -20 ℃~ 70 ℃
7.Sampling rate of 10 samples / sec
8. Input impedance 20M
9.The highest potential difference between the thermocouple: < 350V (RMS);
10. Volume:
1) Dimensions: (length * width * height) 30cm * 25cm * 14cm
2) Weight: About 5kg
11. Product warranty: host three years free warranty