JK-64U is a kind of high performance, low cost data acquisition instrument, the use of large screen liquid crystal display can be viewed at the same time multi-channel temperature changes, very suitable for temperature acquisition, temperature recording applications. It has a RS232 interface can be directly uploaded to the PC data also has a USB interface in the PC can not be easily connected with the data can be directly stored in the U disk to save the data to the PC when needed. It is a half rack wide host with a maximum of 64 channels on the back of the direct slot connected to the thermocouple can be measured, and the infinite expansion of the 1 slots, can accept the module combination. Whether you need only a few simple data logging channels, or the need for hundreds of thousands of performance channels, JK-64U can be a reasonable price to meet your temperature collection requirements. JK-64U temperature recording software contains JK-64U temperature recording software

The unique design of the JK-64U allows each 8 channels to be configured for a single unit, in order to achieve maximum flexibility and fast and easy to set the internal automatic range conversion. (that is, 1-8 can be selected as K thermocouple 9-16 for J type thermocouple) with the need to change the configuration on the back of the top 64 channels of direct slot and the infinite expansion of the 1 slots to meet your unique needs. You can only buy what you need at that time, with the development of your application, and then add more modules.

Free JK-64U software simplifies data collection

JK-64U software can solve this problem if it requires the ability to record data based on PC, but does not want to spend time programming. Using this software, you can set up your test, collection and archive management of measurement data and the data obtained and curves

Real time display and analysis.

Familiar with the spreadsheet environment can be easily configured and controlled testing, rich graphics to display your data to provide many options. In addition, the use of JK-64U software can easily send data to other applications for further analysis, or included in your display and report.

Widely used in household appliances, industrial (circuit board PCB temperature detection, etc.) temperature testing field.

JK-64U multi-channel temperature inspection instrument equipped with large screen LCD display, U disk to save the interface, easy to measure and display and save the temperature data, is a multi point real-time monitoring and tracking of the instrument. The high voltage semiconductor relay is used to scan the input signal to realize the high speed scanning, which eliminates the noise and the service life of the relay.

Technical characteristics

Can set the upper and lower limits of the temperature value of each channel, beyond the sound alarm. Large screen liquid crystal display, can also display the multi-channel temperature value with U disk interface, insert the U disk can be massive preservation of temperature recording data.

Special pole for internal electronic ballast for energy-saving lamp, tube, choke coil, magnetic ring, capacitors and other components of the temperature real-time monitoring charged by the computer at the same time, the temperature changes the whole process to curve record and easy analysis and improvement, to improve the reliability of energy-saving lamps, electronic ballast has played a significant role.

Application:

JK-64U multi-channel temperature tester equipped with large screen LCD display, U disk to save the interface, can easily measure the display and preservation of temperature data, is a multi-point real-time monitoring and tracking of the instrument. The high voltage semiconductor relay is used to scan the input signal to realize the high speed scanning, which eliminates the noise and the service life of the relay. Technical characteristics can set the upper and lower limits of the temperature value of each channel, the limit sound alarm. Large screen liquid crystal display, can also display the multi-channel temperature value with U disk interface, insert the U disk can be massive preservation of temperature recording data.

Especially for the lamps, household appliances, electric motors, electric appliances, temperature controller, transformer, thermal protector, and other manufacturers of the industry and the quality inspection department of multi-point temperature field detection. Live real-time monitoring of energy-saving lamp ballast, internal triode, choke coil, magnetic ring, capacitors and other components of the temperature at the same time, the computer will the temperature changes the whole process to curve recorded for reliability analysis and improvement, to improve energy-saving lamps, electronic ballast device plays a large role.

Features
1 Large screen liquid crystal display (the temperature values are displayed and a temperature alarm display) combined with the perfect setting and measurement parameters, meet all user measurement display requirements, function more perfect;
2 Front panel can be directly connected with the U disk, the temperature data according to a certain number of intervals stored in the U disk, selection of computer system software to read the temperature data stored in the U disk, draw the temperature curve, the temperature curve of data to the computer;
3 U inventory number interval can be set (when seconds);
4 The measured object is charged state, can be charged test (300V isolation voltage AC), safe and reliable.
5 The channel between scanning speed can be set (1ms ~ 99m);
6 Can be arbitrarily set a temperature alarm channel (standard), also can be in all the channels alarm.
7 Units of temperature Celsius (c) f (F) can automatically switch;
8 The same instrument can be used T, J, K thermocouple meet different temperature range of the test;
9 The test channel can be set arbitrarily, satisfy the measurement and speed requirements;
10 The machine with the date and time off work, still;
11 The status bar display real-time parameters, and can restore factory setting function in the settings;
12 The channel is not uniformity: 0.5 degrees, 0.1 degrees for the instrument resolution, measurement accuracy of better than 0.5;
13 The thermocouple wire with automatic detection function;
14 Equipped with a communication interface (RS232 or RS485); through the communication interface can also select multi temperature test software;
15 Measurement accuracy of better than 0.5;J: 0 ~ 760 ℃K: 0 ~ 1370 ℃T: -100 ~ 400 ℃

Technology characteristics
Each channel can be set upper and lower limit temperature value, overrun alarm. Large screen LCD display, can display temperature value with U disk interface, insert U disk can be mass storage temperature record data.
Special pole for the internal energy saving lamp electronic ballast, tube, choke coil, magnetic ring, capacitance charged real-time monitoring device temperature at the same time, the computer will process all the changes of temperature rise curve to record, facilitate the analysis, improvement, to improve the reliability of energy-saving lamps, electronic ballast has a big role to play in.